The Future of Mobility Electric Vehicles and the Evolution of Transportation

Mobility is one of the hottest sectors, with start-ups and traditional OEMs constantly developing new technologies and transportation options. The influx of innovative solutions has yet to solve the problem of congested roads, however, and almost every country is feeling the effects. Drivers in Munich waste an average of 87 hours in traffic every year; in Los Angeles, wasted time in traffic hit 119 hours before the pandemic, when roads were more crowded.

Worldwide, 1.3 billion vehicles are now in use, and many of these are privately owned. There are 868 vehicles per 1,000 capita in the United States, 635 in Norway, and 391 in Mexico. China, by comparison, has only 219 per 1,000 capita, but that still accounts for more than 300 million vehicles on the road. Private vehicles contribute to road congestion because they typically accommodate fewer passengers than public transportation or other shared options. The appeal of private ownership remains strong in many countries despite the recent rise of ride-sharing services. McKinsey analysis shows that private cars are used in 45 percent of all trips, outpacing public transport, micromobility (consisting of scooters and bikessome electricand other small vehicles), ride-sharing, ride hailing, and walking (exhibit).

Image description:

A horizontal stacked bar chart shows the mobility split among six modes of transportation worldwide in 2022. The most prevalent mode is private car at 45 percent, followed by traditional public transportation at 23 percent. The other four modes are micromobility at 16 percent, walking at 14 percent, ride hailing and taxi at 2 percent, and new forms, such as robotaxis, at 1 percent.

End of image description.

This legacy of private-car congestion does more than frustrate people. It also encourages developers to build garages and public officials to install more parking spaces, gobbling up scarce, valuable urban land that could otherwise be devoted to parks or other amenities. The United States, one of the worlds most car-dependent countries, now has eight available parking spots for every car. Additionally, the expansion of roadways and related infrastructure to ease congestion forces governments to spend more on maintenance and operations. And most critically, the high rates of private-car ownership are contributing to increased carbon emissions.

Within the next decade, however, the mobility ecosystem will most likely undergo a transformation not seen since the early days of the automobileand one main shift will be the decline of private-car use. Governments are already enacting regulations to reduce the number of vehicles on the road to ease congestion and reduce emissions, and consumers are also voicing preferences for more efficient, green, and convenient transportation options. As technology advances, even more innovative mobility options could emerge, including roboshuttles (shared autonomous minibuses with four to eight seats) or urban air taxis.

The result of all these changes? A mobility ecosystem that is more intelligent, seamless, and environmentally friendly.

Disruptive trends and technologies: The forces transforming mobility

Heres a look at the disruptive trends and technologies that will shape the future of mobility and the impact that they will have worldwide.

Consumers are excited about the new options

The McKinsey Center for Future Mobility conducts an annual consumer survey that looks at four major trends: autonomous driving, electrification, connectivity, and shared mobility. Many respondents to the 2022 survey say they are open to shifting their transportation habits. Consider a few findings:

• Almost one-third of respondents (30 percent) plan to increase their use of micromobility (for instance, e-bikes and e-scooters) or shared mobility over the next decade.
• Nearly one-half of respondents (46 percent) are open to replacing their private vehicles with other modes of transport in the coming decade.
• Most respondents (70 percent) are willing to use a shared autonomous shuttle with up to three other travelers; 42 percent of those trips would otherwise be taken by private vehicle.

The desire for a more enjoyable mobility experience is behind many of these shifts. A quick trip on the subway while reading a book often beats an hour behind the wheel in traffic, and cities that can offer that convenience might increase metro ridership. Sustainability concerns are also critical. The survey results show that 46 percent of respondents have already switched to more sustainable brands or products, and another 16 percent plan to make considerable changes to promote sustainability.

Regulations are driving awareness and sustainability

In 2020, the transportation sector accounted for about 20 percent of global greenhouse-gas emissions, with more than 40 percent of the total coming from private cars. To promote greener transport, over 150 cities have implemented measures to curb private-vehicle use, which include efforts to increase awareness about emissions from private cars, limit the number of private cars in cities, or provide financial incentives to use more environmentally friendly mobility modes.

New trends and technologies are emerging

Some new mobility trends and automotive technologies, especially leading-edge electric-vehicle (EV) batteries, frequently make the headlines. Others are emerging more quietly but could have an equally significant effect on future mobility, although some may not exert their full impact for several years.

Why the automotive future is electric

That hum in the distance is the sound of the concept of mobility changingfor the better. While challenges to the electrification of the vehicle parc persist, opportunities worth fighting for also lay ahead. This is particularly evident in cities, where emissions, congestion, and safety constitute major issues today. If the status quo continues, mobility problems will intensify as population and GDP growth drive increased car ownership and vehicle miles traveled. In response, the mobility industry is unleashing a dazzling array of innovations designed for urban roads, such as mobility-as-a-service, advanced traffic management and parking systems, freight-sharing solutions, and new transportation concepts on two or three wheels.

The current opportunity to transform the way we move fundamentally results from changes in three main areas: regulation, consumer behavior, and technology.

Regulation. Governments and cities have introduced regulations and incentives to accelerate the shift to sustainable mobility. Regulators worldwide are defining more stringent emissions targets. The European Union presented its Fit for 55 program, which seeks to align climate, energy, land use, transport, and taxation policies to reduce net greenhouse gas emissions by at least 55% by 2030, and the Biden administration introduced a 50 percent electric vehicle (EV) target for 2030. Beyond such mandates, most governments are also offering EV subsidies.

Cities are working to reduce private vehicle use and congestion by offering greater support for alternative mobility modes like bicycles. Paris announced it will invest more than $300 million to update its bicycle network and convert 50 kilometers of car lanes into bicycle lanes. Many urban areas are also implementing access regulations for cars. In fact, over 150 cities in Europe have already created access regulations for low emissions and pollution emergencies.

Consumer behavior. Consumer behavior and awareness are changing as more people accept alternative and sustainable mobility modes. Inner city trips with shared bicycles and e-scooters have risen 60 percent year-over-year and the latest McKinsey consumer survey suggests average bicycle use (shared and private) may increase more than 10 percent in the post-pandemic world compared with pre-pandemic levels (See also The future of micromobility: Ridership and revenue after a crisis, July 2020). In addition, consumers are becoming more open to shared mobility options. More than 20 percent of Germans surveyed say they already use ride-pooling services (6 percent do so at least once per week), which can help reduce vehicle miles traveled and emissions (See also Shared mobility: Where it stands, where its headed, August 2021).

Technology. Industry players are accelerating the speed of automotive technology innovation as they develop new concepts of electric, connected, autonomous, and shared mobility. The industry has attracted more than $400 billion in investments over the last decadewith about $100 billion of that coming since the beginning of 2020. All this money targets companies and start-ups working on electrifying mobility, connecting vehicles, and autonomous driving technology (See also Mobilitys future: An investment reality check, April 2021). Such technology innovations will help reduce EV costs and make electric shared mobility a real alternative to owning a car.

Electrification will play an important role in the transformation of the mobility industry and presents major opportunities in all vehicle segments, although the pace and extent of change will differ. To ensure the fast, widespread adoption of electric mobility, launching new EVs in the market is an important first step. In addition, the entire mobility ecosystem must work to make the transformation successful, from EV manufacturers and suppliers to financers, dealers, energy providers, and charging station operatorsto name only a few (Exhibit 1).

The future of passenger vehicle powertrains is electric; the transformation is ongoing

The tipping point in passenger EV adoption occurred in the second half of 2020, when EV sales and penetration accelerated in major markets despite the economic crisis caused by the COVID-19 pandemic. Europe spearheaded this development, where EV adoption reached 8 percent due to policy mandates such as stricter emissions targets for OEMs and generous subsidies for consumers.

In 2021, the discussions have centered on the end date for internal combustion engine (ICE) vehicle sales. New regulatory targets in the European Union and the United States now aim for an EV share of at least 50 percent by 2030, and several countries have announced accelerated timelines for ICE sales bans in 2030 or 2035. Some OEMs have stated their intentions to stop investing in new ICE platforms and models and many more have already defined a specific date to end ICE vehicle production. Consumer mindsets have also shifted toward sustainable mobility, with more than 45 percent of car customers considering buying an EV.

However, the continued acceleration of electrification is putting significant pressure on OEMs, their supply chains, and the broader EV ecosystem to meet these targets. This is particularly obvious with respect to setting up the required charging infrastructure.

By 2035, the largest automotive markets will go electric

Regulatory pressure and the consumer pull toward EVs vary greatly by region. Europe is mainly a regulation-driven market with high subsidies, while in China consumer pull is very strong despite reduced incentives. In the United States, EV sales have grown slowly due to both limited regulatory pressure and consumer interest, although the regulator trend is set to change under the new administration.

On a global level, we expect EV (BEV, PHEV, and FCEV) adoption to reach 45 percent under currently expected regulatory targets. However, even this transformative EV growth outlook is far below whats required to achieve net zero emissions. EVs would need to account for 75 percent of passenger car sales globally by 2030, which significantly outpaces the current course and speed of the industry.

We believe Europeas a regulatory-driven market with positive consumer demand trendswill electrify the fastest and is expected to remain the global leader in electrification in terms of EV market share. In addition to the European Commission target, which requires around 60 percent EV sales by 2030, several countries have already announced an end to ICE sales by 2030. In line with this, seven OEM brands have committed to 100 percent EV sales by 2030 within the European Union. In the most likely accelerated scenario, consumer adoption will exceed regulatory targets and Europe will reach around 75 percent EV market share by 2030. The European Union announced a zero-emissions target for new cars by 2035.

China will also continue to see strong growth in electrification and remain the largest EV market in absolute terms. Uptake results from strong consumer pull, despite low EV subsidies and no official end date for ICE sales. However, the governments dual-credit policy has led to an increased EV share in OEMs portfolios. Our adoption modeling yields a Chinese EV share above 70 percent for new car sales in 2030 in the accelerated scenario.

In the United States, the Biden administration announced a 50 percent electrification target for 2030, strong investments in charging infrastructure, and more stringent fleet emissions targets. EV uptake will result mainly from regulatory support in California and other states that follow its CARB ZEV regulation. US OEMs support electrification targets and have declared ICE bans by 2035, meaning the United States will follow Europe and China in EV uptake with a small delay; it is expected to exceed current regulatory targets and reach 65 percent EV sales by 2030 in the accelerated scenario (Exhibit 2).

The e-mobility transformation will disrupt more than the automotive industry

In the European Union, achieving the accelerated scenario of around 75 percent EV sales by 2030 will have implications for the entire EV value chain and ecosystem. In parallel, the industry must decarbonize the full lifecycle of vehicles to get closer to a net-zero target.

Incumbent automotive suppliers need to shift production from ICE to EV components. Europe will have to build an estimated 24 new battery giga-factories to supply local passenger EV battery demand. With more than 70 million EVs on the road by 2030, the industry will need to install large numbers of public chargers and provide maintenance operations for them. Renewable electricity production needs to increase by 5 percent to meet EV charging demand. Finally, emissions from BEV production must decline, since BEVs currently have 80 percent higher emissions in production than ICE vehicles (Exhibit 3).

Electrification will cause a major shift in the entire automotive supply chain

The transformation of the automotive industry toward electrification will disrupt the entire supply chain and create a significant shift in market size for automotive components. Critical components for electrification such as batteries and electric drives and for autonomous driving like light detection and ranging (LiDAR) sensors and radar sensors will likely make up about 52 percent of the total market size by 2030. Components only used in ICE vehicles such as conventional transmissions, engines, and fuel injection systems would see a significant decline to around 11 percent by 2030about half the size of 2019 levels. Such a drastic shift will force traditional component players to adapt quickly to offset decreasing revenue streams.

The scale of disruption will be significant: according to the Institute for Economic Research (Ifo) in Munich, more than 100,000 jobs will change in the German automotive industry by 2030. That is roughly five to ten times the scale of jobs compared with the phaseout of coal power that Germany announced for 2038 (Exhibit 4).

Announced EU battery production will likely stay just ahead of demand

Based on announced buildup plans, we expect a 20-fold increase in battery production capacity in Europe to 965 GWh by 2030. Assuming the full capacity is built by 2030, Europe should meet expected demand of 874 GWh. BEV passenger cars and commercial vehicles will drive 90 percent of this battery demand. While on paper announced capacities seem to follow and match demand, in reality temporary implementation risks will likely occur given giga-factory production issues, typically slow yield ramp-ups, fragmentation of the supply chain, and large inflexible OEM contracts. Thus, in an accelerated EV adoption case, battery demand would come very close to exceeding announced supply in the medium term. In the next ten years, we expect the mining industry to slow down and other geopolitical and supply chain crises to pop up periodically, leading to some short-term price spikes in commodities like nickel and lithium.

Battery cell production is moving physically closer to vehicle assembly plants. While ten years ago almost all cells were imported from Asia, regional production hubs exist today in Eastern Europe, for example. Furthermore, multiple plants will go onstream in key vehicle-producing countries like Germany, the United Kingdom, and France and in low-carbon-emitting environments such as Norway and Sweden.

In addition to incumbent battery cell players from Asia setting up locations in Europe, some entirely new companies are entering the space. One key development in battery sourcing involves the backward integration of OEMs from packs and modules up to cell productionmostly in the form of joint ventures with cell manufacturers. OEM backward integration plans result from their growing battery cell demand, the desire for control and certainty of supply, and the ambition to keep a significant part of vehicle value creation inhouse. OEMs are also seeking areas for differentiation, with battery technology, durability, and performance seen as key evaluation criteria for BEVs.

Production of raw materials and battery components follow the localization trend of battery cell plants. However, there is a time lag and only some of the raw materials needed, which include nickel, cobalt, lithium, and graphite, are available for local sourcing in Europe. Companies must therefore compete globally to secure required volumes and do it sustainably in line with environmental, social and governance (ESG) criteria. While all four commodities must ramp up quickly, with potential price variation in the future, nickel will likely be the commodity under the most pressure in the short to medium term (Exhibit 5).

Acceleration in charging infrastructure buildup needed

In line with EV uptake, the buildup of charging infrastructure needs to accelerate to avoid becoming a potential bottleneck and limiting consumer-driven EV adoption. Building charging infrastructure in sync with the EV fleet will be essential in the coming decade.

While first-generation EV buyers relied mainly on private charging (in 2020, 80 percent of EV buyers in Europe had access to private charging), the next generation will depend on public charging. More than 50 percent of Europeans will be living in multifamily homes without private charger access, and public chargers will ensure practicality of EVs for long-distance trips, which prospective EV buyers still consider a main concern.

Likewise, regulatory processes to install chargers in private homes require simplification and production capacity for wall boxes must increase. Production scale-up and simplified regulation (in terms of shortened permit and building times) are also necessary for public chargers, in addition to the creation of demand-based coverage.

We estimate the industry needs to install more than 15,000 chargers per week by 2030 within the European Union. Simplified regulations are needed to facilitate charger siting, since it can currently take up to three years to obtain approval for grid extensions for a fast-charging station. Ensuring the EU-wide coverage of public charging is essential to avoid having chargers located only in profitable locations.

EVs are poised to command on average more than 5 percent of electricity demand in 2030 in Europe. It will be important to reduce charging during peak load periods through managed charging by controlling charging time, duration, and intensity with vehicle-to-grid (V2G) technology as an enabler. In a scenario with appropriately managed charging devices in place as well as incentives to charge during nonpeak hours, much of the customer impact on the electric grid will be mitigated (Exhibit 6).

Reaching net zero also means decarbonizing EV production

There is a clear path to reducing CO₂ equivalent (CO₂e) emissions from passenger cars in operation. A recent International Council on Clean Transportation (ICCT) analysis stated that the shift from ICE to BEV would reduce total lifecycle CO₂e emissions by around 65 percent based on the current average energy mix in Europe and by 83 percent with entirely green electricity.

As the electricity supply evolves and charging with green energy for a larger fleet of EVs becomes feasible, materials and production will become the dominant sources of emissions in an EVs lifecycle. Today an EVs production generates an almost 80 percent higher emissions intensity compared with an ICE car, due mainly to the battery and the vehicles higher share of aluminum.

When aiming to reduce material emissions, two main issues matter:

Increasing recycled content. Replacing virgin/primary materials with recycled alternatives will save a large share of emissions associated with the initial generation of raw materials. Replacing 30 percent of primary material with recycled material can save 15 to 25 percent of production emissions. Recycled material use, however, comes with multiple challenges, including the reality that end-of-life (EOL) collection remains very immature, making it difficult to achieve an automotive-grade materials stream. Furthermore, multiple industries are interested in using recycled material to achieve their decarbonization targets, which will result in supply bottlenecks and the higher prices of several recycled materials.

Shifting to green raw materials. Using primary materials produced in a low/no-carbon process enables high-grade materials with low emissions footprints. Examples of this approach include inert anode aluminum smelting via hydroelectricity or steel produced through hydrogen-based direct reduced iron in an electric arc furnace (H2 DRI-EAF steel). Around 80 to 90 percent of todays typical material emissions can be eliminated with 2030 technologies. The main approaches involve decarbonizing the raw material refining processes by using renewable electricity, for example, and decarbonizing the forming as well as other high-energy manufacturing processes, also via electrification.

While a switch in electricity resources is simple, the shift from todays processes to manufacturing routes that avoid CO₂e emissions altogetherrather than capturing or gradually reducing themwill require significant investments in plants and equipment. A predictable demand for green materials and long-term commitments between suppliers and buyers would help overcome this obstacle in the next decade.

A determined approach to decarbonizing and combining these methods could produce vehicles with 10 to 30 percent of todays production emissions by 2030a challenging feat but necessary to fulfill the Green Deal aspiration. Nevertheless, decarbonizing the supply chain and achieving Scope 3 emissions reductions may cause vehicle costs to rise at a time when OEMs are trying to lower prices to boost consumer interest and achieve sustainable long-term margins (Exhibit 7).

A 55 percent transport emissions reduction target by 2030 versus 1990 requires more drastic measures

Current regulation and targets are not sufficient if the road transport sector wants to fully contribute to the 55 percent CO₂e emissions reduction target by 2030 versus 1990 as required by the Fit for 55 program.

However, passenger cars have one advantage over other industries from a decarbonization point: The zero-emissions option (e.g., the BEV) is cheaper than the current alternative (ICE) from a total cost of ownership perspective in some countries today and by 2025 at the latest in countries without incentives. This is not the case in most other industries, where decarbonizing results in higher costs for both producers and consumers.

However, with the average car age at ten years in Europe, it will take time for EV sales to have an impact at the parc level. The current regulation on sales is therefore not sufficient to meet the goal of a 55 percent emissions reduction from 1990 levels by 2030.

Closing this gap will require further measures targeting CO₂e emissions of the vehicle parc. ICE vehicle kilometers traveled could be decreased by reducing private car kilometers, increasing shared mobility, and changing consumer perspectives on walking/biking.

At the same time, the most efficient lever is to accelerate the ICE parc turnover and remove highly polluting ICE vehicles from the fleet with, for example, cash-for-clunkers programs for old ICE cars.

Another way to reduce CO₂e emissions from ICE vehicles is to increase the share of bio- and e-fuels as these have a low carbon footprint and are compatible with the existing ICE parc. However, the majority of bio- and e-fuels supply will be required to decarbonize marine/aviation and commercial road transport, for which only limited zero-emissions alternatives exist today (Exhibit 8).

Electric vehicles are coming, and we are on the right track regarding decarbonizing the transport sector, though more actions need to be taken. It is an industry transformation taking place at unprecedented speed. It is also crossing industry borders, involving energy, infrastructure, mobility, and automotive players. While a major challenge, it represents a huge opportunity for incumbents and new players to take a leading role in creating new multi-billion industries and jobs. The key will be to couple sustainability with economic viability through innovative technology and properly guided mobility transformation. Based on its diverse mobility landscape, its focus on sustainability and its proven technology leadership, Europe could emerge as a role model for other regions globally.